The leakage testers of the PRO DD series are leak detectors that are operated with compressed air, helium or a helium mixture and determine the leakage according to the differential pressure principle. This is a suitable method for relatively slow measurements with high accuracy requirements.
The PRO dP leakage tester is available for fast measurements on many test specimens.
A precision pressure regulator is installed in the PRO DD leakage tester, which converts the electronically preselected pressure unit into a pneumatic pressure with the highest accuracy. The test specimen is evacuated by the leak detector. The helium pressure from the control device is then connected to the test object, the connection to the test object is shut off and the pressure drop is measured on the test object. Using special software, the leakage value is then calculated in the built-in microcontroller. The devices can be delivered tailored to different pressure ranges. Pressures up to 200 bar can be set in the standard version.
The system pressure indicator shows the measured value at the pressure sensor and, after the leakage test, the leakage value. The pressure preset signal is represented by the internal microcontroller or is passed to it as an external analog preset voltage. The actual pressure value is measured with a high-precision pressure sensor, the characteristic curve is corrected by the microcontroller. The device already has a USB interface in the standard version. Other available options include RS232, CAN, Ethernet and RS485. Communication can be provided in all common protocols.
The leakage tester is delivered with a standard program with which customer-specific program sequences for leak measurement can be created. The device can also be operated as a pressure controller. The processes can be stored on the leak detector. This makes an individual test sequence possible without a PC.
Suitability: The PRO DD is only suitable for operation with gaseous non-aggressive and non-flammable media such as helium.
Application: production, developement, research, testing technology
Measurement range: 0 … 200 mbar relative to 0 … 200 bar absolute; leakage values up to 10-4 mbar*l/s
Certificates: factory calibration (DAkkS optional), CE- marking, declaration of conformity, certificate of origin
Dimensions: 444 x 132,9 x 264,5 mm (19“ housing)
Scope of delivery: leakage tester with USB- interface, power cable (1.5 m), USB cable, certificates (calibration, declarations of conformity), software for PC control
Options: RS232 interface, CAN interface, RS485 interface, Ethernet interface, DAkkS calibration, analog output 0 – 2V, 0 – 5V, 0 – 10V or -10V… +10V, daytime pressure sensor, analog input 0 – 10 V for the pressure specification, 19″ in-built housing instead of desktop housing. Other interfaces are available on request.
Accessories: interface cable, calibration software for calibrating the instrument, pressure connection adapter